Pool tables can develop worn spots and rips in the surface if not treated carefully. This will throw a game off for most people and charges of fixing the game in favor of you can be brought by even the friendliest competitors. The nature of the covering, which is felt, will have a lot to do with how the table is used, so a rip or worn area must be repaired or replaced. This pool table refelting is best done by a company who does this all of the time.
You could patch that rip with a bit of felt or redo the entire surface. Patching a rip can take a few minutes of careful preparation and you can be back at your game of eight ball. You must ensure that the patch does not interfere with the delicate roll of each ball as it passes over this area. This can be accomplished with a small piece of felt, some adhesive, a very sharp knife and a lot of patience.
Recovering the entire piece will present itself as a necessary step when you find the worn, faded look that may be present after you have had the table for a few years. This is something that can be a do it yourself project if you follow a few simple rules. A conversation with the personnel at a pool table supply house will help you understand what you need to do. Several firms in the Denver, CO area will assist you with this.
The professionals that do this have the experience to see it is done right. They will be able to help you see other possibilities for your table and help you with the decorative elements in the rest of the room. One of he first questions they will ask will have to do with the color you are interested in.
The vast majority of pool tables come in a standard green felt. This is fine if you are looking for standard, however, the ability to get other colors might interest you. Some of these others will be purple, blue, red, cream and those with designs on them. Sprucing up your party room can begin with the largest game there.
The professionals will arrive and get right to work. The measurements will be taken to make sure they have adequate felt of the proper color. The rails will need to be removed to reveal the old staples, which will have to be removed as well. The old glue must come off and the surface prepped to receive the new adhesive.
This is the most important step in the process. Making sure the measurements are followed, the professionals will cut the piece to exacting dimensions. This will allow just enough to hang over the edge. The adhesive, in the appropriate amount, will be applied and the felt laid properly. This will be stretched to just the right tension and stapled under the railing location.
Rails are then disassembled and covered as well. With weights on the table top and rails reinstalled, a 24 hour curing time will be appropriate. A representative will come back and ensure everything is as it should be. They might even challenge you to a game to make sure.
You could patch that rip with a bit of felt or redo the entire surface. Patching a rip can take a few minutes of careful preparation and you can be back at your game of eight ball. You must ensure that the patch does not interfere with the delicate roll of each ball as it passes over this area. This can be accomplished with a small piece of felt, some adhesive, a very sharp knife and a lot of patience.
Recovering the entire piece will present itself as a necessary step when you find the worn, faded look that may be present after you have had the table for a few years. This is something that can be a do it yourself project if you follow a few simple rules. A conversation with the personnel at a pool table supply house will help you understand what you need to do. Several firms in the Denver, CO area will assist you with this.
The professionals that do this have the experience to see it is done right. They will be able to help you see other possibilities for your table and help you with the decorative elements in the rest of the room. One of he first questions they will ask will have to do with the color you are interested in.
The vast majority of pool tables come in a standard green felt. This is fine if you are looking for standard, however, the ability to get other colors might interest you. Some of these others will be purple, blue, red, cream and those with designs on them. Sprucing up your party room can begin with the largest game there.
The professionals will arrive and get right to work. The measurements will be taken to make sure they have adequate felt of the proper color. The rails will need to be removed to reveal the old staples, which will have to be removed as well. The old glue must come off and the surface prepped to receive the new adhesive.
This is the most important step in the process. Making sure the measurements are followed, the professionals will cut the piece to exacting dimensions. This will allow just enough to hang over the edge. The adhesive, in the appropriate amount, will be applied and the felt laid properly. This will be stretched to just the right tension and stapled under the railing location.
Rails are then disassembled and covered as well. With weights on the table top and rails reinstalled, a 24 hour curing time will be appropriate. A representative will come back and ensure everything is as it should be. They might even challenge you to a game to make sure.
No comments:
Post a Comment